FRD*.S08 VALVE SERIES
Hybrid SAE08 Cartridge - 250 bar
Direct acting - Pressure Compensated
DESCRIPTION
A direct acting, drop-in insert type, 2-way pressure compensated flow control valve. The flow rate of this valve in the 1 to 2 flow path
is largely independent of the system pressure and is determined by the dimension of a calibrated orifice. The valve cannot be
adjusted for variable flow output. Free flow in the 2 to 1 path is allowed and not pressure compensated.
Cavity
HYDRAULIC SYMBOL
Cross section
VH030
TECHNICAL DATA
MAXIMUM FLOW
12 l/min
MAXIMUM OPERATING PRESSURE
250 bar (2 to 1 max working pressure 210bar)
WEIGHT
0,013 kg
SEAL KIT CODE
SK.060 (standard sealing NBR-BUNA-N)
OIL TESTING CONDITIONS
ISO VG 46 cSt
TECH. SPEC. FOR CHARACTERIZATION
see page 689
ORIENTATION
No restrictions
FILTRATION
20/18/15 ISO 4406 (maximum filtration admitted)
VISCOSITIES
7,4 to 420 cSt
FLUIDS
Mineral - based or synthetics with lubricating properties
OIL TEMPERATURE RANGE
-30° C to 110° C
O-RING TEMPERATURE RANGE
-30° C to 110° C (standard sealing NBR - BUNA - N)
-35° C to 140° C (HNBR - Upon customer request)
-23° C to 225° C (FKM - Upon customer request)
EXTERNAL COMPONENT TREATMENT
Oxide burnished
F R D
*
.
ORDERING CODE
S 0 8 0 N
. .
* ** *
Valve basic code
Size
FIXED FLOW SETTING
(l/min with 1 decimal)
S08 = Ø12,7 bore size
FRD0 FRD1
2 l/min 0,6 l/min020 006
3 l/min 0,8 l/min030 008
4 l/min 1,0 l/min040 010
5 l/min 1,2 l/min050 012
6 l/min 1,4 l/min060 014
7 l/min 1,6 l/min070 016
8 l/min 1,8 l/min080 018
9 l/min 90
10 l/min 100
11 l/min 110
12 l/min 120
STEEL WIRE OPTION
W = If requested, leave
blank if not.
0 = 2-12 l/min
1 = 0,5-1,8 l/min
Flow Setting Range
Note
Customized fixed flow can be provided upon request.
FLOW CONTROLS
Specifications may change without notice.
PERFORMANCE DETAILS
The performance chart illustrates flow handling capacity in the pressure compensated mode for a few significant flow settings.
p,Q curves are recorded from 1 to 2 port at TOil = 40°C and 46 cSt.
NOTE
1 2
